StoneNhance is a clear, water-based coating designed to enhance the natural color and stains in materials such as stone, slate, brick, concrete and more. This high gloss coating brightens dull or faded colors, and protects surfaces from weathering and environmental conditions. StoneNhance provides outstanding resistance towards water, liquids, stains, oil and grease; and protects the surface from scratching, marring and fading.

Due to its outstanding adhesion and durability, StoneNhance may be applied on indoor and outdoor surfaces horizontally and vertically. StoneNhance is eco-friendly, biodegradable coating comprised of more than 75% renewable, raw materials. It contains low VOC's, and is neither hazardous nor flammable. StoneNhance is also available in matte finish, and may be stained or pigmented. Please contact us directly for more information. 1 (800) 790-9299

StoneNhance Coverage | Application | Clean Up | StoneNhance SM Data Sheets


StoneNhance Coverage

StoneNhance coverage ranges from 250 to 400 square feet per gallon depending on surface texture and porosity. STONERENU goes on easily and dries to a crystal clear finish. Always test each surface for appearance and penetration before proceeding with application on the entire surface.

StoneNhance Application

StoneNhance may be applied by brush, roller or low pressure airless spray. At 77°F and 50% RH the coating should be dry to the touch in less than an hour. The time may vary based on prevailing conditions. One coat is usually sufficient however if a second coat is desired for greater gloss and/or protection, allow a minimum of 30 to 60 minutes between coats. Prior to application make sure that washed surface is allowed to dry thoroughly. The coated surface can be subjected to light foot traffic after it is fully dry. Allow 24 hours time for optimal curing before subjecting the coating to heavy traffic. Do not apply at temperatures below 50°F or above 90°F Hold off the application if rain or heavy dew is imminent. Avoid heavy buildup, puddling, and excessive overlapping of sealer.

StoneNhance Clean Up

Clean spills and spatters immediately with soap and warm water. Clean hands and tools immediately after use with soap and warm water. After cleaning, flush spray equipment with mineral spirits to prevent rusting of the equipment. Follow manufacturer's safety recommendations when using mineral sprits.