ShineOnTrim is a viable, cost effective replacement for the common silicone based surface coatings which have a shorter lifespan and wash off easily. Silicone coatings can leave oily residues behind attracting and spreading dirt and other contaminates, but not ShineOn Trim. ShineOnTrim provides a dry, clean finish with no leftover residue. It has built-in UV protection that protects surfaces from fading and deteriorating. And its durability against abrasions allows for a long lasting protection that makes automobiles look newer for less.
ShineOnTrim is an eco-friendly coating that is safe and easy to apply. It contains non-hazardous ingredients, and won't produce harmful fumes or odors. It is meant for use on black-colored surfaces.
ShineOnTrim can be applied by spraying or brushing. If more than one coat is necessary or desired, allow the first coat to dry prior to the second application. Prevent the coating from getting on hands and clothing as the dry film is difficult to remove. ShineOnTrim will dry in 10 to 15 minutes at ambient temperature of about 78°F and low humidity. The vehicle or other coated object may be put to use after this time, provided the coated surface itself is not exposed to harsh treatment.
ShineOnTrim Clean Up
Optimal film properties will be achieved in 48 hours. Tools and work area can be quickly and easily rinsed with water. Prior to application make sure that the object to be coated and sealed is dry and free of dirt, grease and other contaminants. If applying via spraying, make sure to protect surrounding areas from overspray. Wipe off excess and run-offs with a damp rag or sponge.