ShineOnFlex is a clear, flexible coating that creates a glossy "wet" appearance on soft and flexible surfaces. An addition to our ShineOn line, ShineOnFlex is designed for surfaces such as tire sidewalls and window seals by enhancing the material, and creating a clean, shiny finish that is long lasting and oil free.

Unlike other car care products which fade quickly and leave oily residue behind attracting and spreading dirt ShineOnFlex contains built in UV protection that helps resist fading and deterioration. And due to its strong adhesion and high flexibility, ShineOn Flex enhances the appearance and lifespan of your tires and seals, and prevents them from becoming hard and brittle.

ShineOnFlex's coating can last for weeks to months, depending on wear and tear greatly reducing the need for reapplication. It creates an easy to clean, water repellent surface that prevents black rub marks and stains due to oxidized rubber. ShineOnFlex is an eco-friendly coating that is safe and easy to apply. It contains non-hazardous ingredients, and won't produce harmful fumes or odors.



ShineOnFlex Key Benefits | ShineOnFlex Application | Additional Product Data Sheet





ShineOn

ShineOnFlex Key Benefits

  • Gives glossy "wet tire" look
  • Lasts for months
  • No greasy residue
  • No tire spinoff
  • Quick, easy application
  • No fumes, No odors
  • Water-based, environmentally friendly formula

ShineOnFlex Application

ShineOnFlex is completely water based and there are no odors or fumes associated with the liquid. Prior to application make sure that the object to be coated and sealed is dry and free of dirt, grease and other contaminants.

ShineOnFlex can be applied by spraying or brushing. If applying via spraying, make sure to protect surrounding areas from overspray and make sure to cycle clean water through the trigger spray after use to prevent clogging. Wipe off excess and run-offs with a damp rag or sponge. Prevent the coating from getting on hands and clothing as the dry film is difficult to remove. Tools and work area can be quickly and easily rinsed with water.

If more than one coat is required, allow the first coat to become dry to the touch. ShineOnFlex will dry in 10 to 15 minutes at ambient temperature of about 78°F and low humidity. Optimal film properties will be achieved in 48 hours.