Application
- Surface to be coated must be free of dirt, oil, grease and other loose debris.
- Damp or wet objects should be thoroughly dried before coating.
- Shake the aerosol can well before and frequently during use.
- Hold the bottle upright and about 12 inches away from the surface to be sprayed.
- Spray from all four sides of the object to be coated to ensure complete coverage. This constitutes one coating cycle.
- Porous surfaces may require more than one coating cycle for optimal protection.
- Each coating must be partially dry prior to application of additional coatings.
- For maximum protection coat all exposed surfaces.
ZRC is a Registered Trademark of ZRC Worldwide, Marshfield, Massachusetts USA |
