How To Use

  1. Surface to be coated must be free of dirt, oil, grease and other loose debris.
  2. Damp or wet objects should be thoroughly dried before coating.
  3. Make sure that Leatherguard and ambient temperature are at 50° F or higher.
  4. Shake the aerosol can well before and frequently during use.
  5. Hold the can upright and about 12 inches away from the surface to be sprayed.
  6. Spray from all four sides of the object to be coated to ensure complete coverage. This constitutes one coating cycle.
  7. Porous surfaces may require more than one coating cycle for optimal protection.
  8. Each coating must be partially dry prior to application of additional coatings.
  9. For maximum protection coat all exposed surfaces.

CAUTION: Propellants within the aerosol contain volatile solvents that can ignite easily. Keep away from open flame sparks or heat. Prolonged exposure to sunlight may expand the pressurized solvents and the can could explode. Do not puncture or incinerate. Do not store at temperatures above 120ºF. Vapor harmful. Use with adequate ventilation. Avoid contact with eyes and skin and prolonged exposure to vapors. If swallowed do not induce vomiting. Seek immediate medical attention.

 

 

 

 

©2008 Liquiguard Technologies - All rights reserved | test reports | Liquiguard's Privacy Statement | Warrenty Information | Links

company | news | order | contact | home