How To Use
- Before application, ensure the surface is thoroughly clean, dry and grease-free. High pressure water jet or steam cleaning is recommended for older surfaces.
- This invisible water-based coating can be sprayed, brushed or rolled onto the surface needing protection.
- Avoid applying in wet or cold weather.
- Shake well before use and spray StoneShine™ onto the surface. For very porous surfaces, repeat procedure if necessary. Allow 2-5 minutes between each coat.
- For application on larger surfaces, apply StoneShine™ in sections.
- Full optimal protective is reached after 24 hours.
- Dirty water and other contaminants will not be able to penetrate the protected surface and dirt particles will be easily washed off by rain or when rinsed with water.
CAUTION: Propellants within the aerosol contain volatile solvents that can ignite easily. Keep away from open flame sparks or heat. Prolonged exposure to sunlight may expand the pressurized solvents and the can could explode. Do not puncture or incinerate. Do not store at temperatures above 120ºF. Vapor harmful. Use with adequate ventilation. Avoid contact with eyes and skin and prolonged exposure to vapors. If swallowed do not induce vomiting. Seek immediate medical attention.
|
