How To Use
- Surface being treated must be clean and free of dirt, grease and any other surface treatment.
- Shake the spray container well before spraying and evenly moisten the entire area being treated.
- Dry at room temperature (approx. 70 deg.F) for about 2 hours or till the material feels dry. Drying can be accelerated by use of a drying appliance. Optimal protective effect will be reached after 24 hours.
- Spills on horizontal surfaces of very porous materials, such as fabrics, should be blotted up immediately to prevent the liquid from migrating to the surface below.
- Spills can be easily sprayed clean or wiped off with a damp cloth with no fear of staining.
- Without the power of StainlessSeal capillary action will quickly spread the stain to a larger area. StainlessSeal protected articles will require less frequent cleaning and last longer.
CAUTION: Propellants within the aerosol contain volatile solvents that can ignite easily. Keep away from open flame sparks or heat. Prolonged exposure to sunlight may expand the pressurized solvents and the can could explode. Do not puncture or incinerate. Do not store at temperatures above 120ºF. Vapor harmful. Use with adequate ventilation. Avoid contact with eyes and skin and prolonged exposure to vapors. If swallowed do not induce vomiting. Seek immediate medical attention.
|
